AUTOMOTIVE
- Automotive Restoration
- Vehicle Frames
- Recreational Equipment
- Utility Trailers
- Ramps
- Floorboards
- Quarter Panels
MARINE
- Bridges
- Ships
- Decks & Deck Railing
- Boat Trailers
- Ferries
- Oar Locks
- Shipping Containers
INDUSTRIAL
- Storage & Fuel Tanks
- Structural Steel
- Manufacturing Equipment
- Farm Equipment
- Implements
- Fencing & Gates
- Pipes
HOME
- Garden Tools
- Lawnmowers
- Trailers
- Wrought Iron Furniture & Railings
- Decorative Screens
- Pet Housing
- Mailboxes
- Fences
Prepare the Surface
Wire brush surface to remove all loose flaky rust.
Do not brush down to bare metal: XionLab Rust Converter product bonds best to a rusty surface.
Wipe away debris with a cloth. Paintbrush or air pressure. All grease and oil must be completely removed from the surface. rinse thoroughly.
Stir well
Stir the product thoroughly until a smooth. Even consistency is obtained.
Apllication
Apply the product with a brush. roller or sprayer. Make sure the metal surface is uniformly covered. for spray application: dilute with up to 20% water to a 0.5-1 mil dry film thickness.
Dry & Curing Time
Allow the 2-in-1 converter & primer to dry completely for 48 hours before applying a top coat. If a top coat is to be applied using only one coat of product.
IF not applying a top coat, a 2nd coat of product may be applied before the first coat has dried within 2 to 4 hours.
Steps 1
Step 2
Step 3
Step 4
Reviews
There are no reviews yet.